The PET air compressor is the main body in the air blower of the blow molding machine. It is a device that converts the mechanical energy of the prime mover (usually an electric motor) into gas pressure energy. It is a special blower for compressed air. Air pressure generating device. Blowing air compressors are divided into: low pressure blowing machine (15-25bar), medium pressure blowing machine (25-35bar), high pressure blowing machine (35-40bar).
Model 型号 | Working medium 工作介质 | suction pressure 进气压力(Mpa,Psig) | Discharge pressure 排气压力(Mpa,Psig) | Motor.KW 电机功率 | Flow rate Nm3/hr 流量 | Voltage 电源电压 | Cooling way 冷却方式 |
ZW-1.7/40 | air | atmosphere | 4,575 | 22KW | 102 | 220V/380V/415V/440V 50/60HZ | Air/water cooling |
ZW-3.4/40 | air | atmosphere | 4,575 | 45 | 204 | 220V/380V/415V/440V 50/60HZ | Air/water cooling |
ZW-5.0/40 | air | atmosphere | 4,575 | 75 | 300 | 220V/380V/415V/440V 50/60HZ | Air/water cooling |
ZW-6.0/40 | air | atmosphere | 4,575 | 75 | 360 | 220V/380V/415V/440V 50/60HZ | Air/water cooling |
ZW-6.7/40 | air | atmosphere | 4,575 | 90 | 402 | 220V/380V/415V/440V 50/60HZ | Air/water cooling |
ZW-5.0/16 | air | atmosphere | 1.6,230 | 55 | 300 | 220V/380V/415V/440V 50/60HZ | Air/water cooling |