TECHNICAL DATA | ||||
Medium | CO2 | Quantity | 1 | |
Inlet pressure MPa(G) | 0.4 | Inlet temperature ℃ | 0~40 | |
Discharge pressure Mpa(G) | 3.0 | Discharge temperature(after cooling) ℃ | ≤50 | |
Flow rate Nm3/h | 600(while inlet pressure=0.4MPa) | Piston stroke mm | 140 | |
Mode | ZW-600/6-40 | Compression stages | 2 | |
Structural style | Reciprocating piston vertical sled mounted type | Cylinder quantity | 4 | |
Shaft speed r/min | 450 ※ | Voltage V | 400V50Hz | |
Cooling mode | Water cooling | Cooling water flow t/h | 6.5 | |
Shaft power kw | 60 | Main motor speed r/min | 1470 ※ | |
Main motor | 75kw 400V 50Hz ※ | |||
Dimensions mmXmmXmm | L2650×W1850×H2350 ※ | Weight t | 4.3 ※ | |
interface size mm | Inlet DN80/discharge DN32/cooling water DN40 | |||
Drive mode | Belt drive | |||
Material of main components | fuselage, slide | cast iron | ||
Piston ring, packing | Filled with PTFE | |||
Air valve, cylinder liner | stainless steel | |||
Scope of supply | Main engine, motor, cooler, separator, oil pump, skid mounted chassis, starting cabinet, intake filter, primary instrument and control components, safety valve, special tools, inlet and outlet matching flanges, random documents, etc. | |||
Additional notes | 1. Lubricating oil is provided by the user. 2. The data in the ※ column is for user reference, and there may be discrepancies when the machine leaves the factory. | |||
Delivery time | 90 days after the contract is signed and the advance payment is received |