m125 quite recovery helium compressor is a device that increases the gas pressure by changing the volume of helium. The common uses of water cooled helium compressor are as follows:
1. Pressurization of helium gas shielding gas for metal, such as magnesium, zirconium, aluminum, titanium, etc.
2. Helium gas recovery, pressurized filling and storage, because helium gas is relatively expensive, it is very necessary to recover helium gas, such as helium gas in helium balloon recovery, waste purification and recycling, suitable for HEW HED
3. Helium gas can be used as a high-vacuum device, nuclear reactor. It is used as a pressurized gas for transporting liquid propellants such as liquid hydrogen and liquid oxygen on rockets and spacecraft.
The main features of bailian feng brand m125 quiet liquid helium compressor products:
All oil-free lubrication is clean and non-polluting.
High efficiency and low energy consumption.
Fully balanced design, low vibration
High reliability, continuous operation for 24 hours.
No special basic requirements, easy to install and maintain
The unit is air-cooled or water-cooled to reduce installation costs.
Compact structure, low operating and maintenance costs.
here is quite recovery m125 water cooled helium compressor technical data
S/N | ITEMS | TECHNICAL DATA | |
1 | Working medium | Dry helium gas | |
2 | model | HED-20/200 | |
3 | Structure | oil free reciprocating | |
4 | Pressure stage | 4 ,4 cylinder ,SW type | |
5 | Rated capacity(standard)Nm3/h | 20(@atmosphere pressure) | |
6 | Rated inlet pressure MPa(G) | Atmosphere pressure | |
7 | Rated outlet pressure MPa(G) | 20.0 | |
8 | Inlet temperature℃ | ≤40 | |
9 | Outlet temperature ℃ | ≤130 | |
10 | Transmit gas temperature℃ | ≤50 | |
11 | Shaft speed r/min | 240 ※ | |
12 | Cooling way | water cooling | |
13 | Lubricat e way | Shaft and connect rod | Grease seal |
Cylinder | Oil free lubricate | ||
Shaft power | ≤10.3kw | ||
14 | Motor power Kw | 15kw 220V 60HZ 3phase ※ | |
15 | Transmit way | Belt driven | |
16 | Installation way | Simple basement | |
17 | Automatic control parts | Overload ,stop automatic | |
18 | External diamension L × W × H mm | 1600X1300X1250 ※ | |
19 | Inlet and outlet mm | 25、M16X1.5-φ10 | |
20 | Weight Kg | 840 ※ | |
21 | Voltage | 220v/60hz/3phase | |
22 | Seal way | Mechanical seal | |
Cylinder | Stainless steel ,and special material | ||
Gas valve | Stainless steel | ||
Gas pipe and cooler | Stainless steel | ||
23 | Supply scope | ||
Main pump, motor, skid chassis, start cabinet, intake filter, machine before a table and control components, safety valves, files, random spare parts and so on. | |||
1. The above parameters are for reference only, and subject to the final technical quotation
2. More displacement, higher filling pressure, please consult us
3.Kinly note ,if you have compressor inquiry please tell us follows information when you send inquiry:
*Compressor working medium:
If single gas ,how many purity ? if mixed gas , what’s gas content lit ?
*Suction pressure(gauge pressure): barg
*Exhaust pressure(gauge pressure): barg
*Flow rate per hour for compressor: (Nm3/hr):
Compressor gas suction temperature ?
Compressor working hours per day : hours
Compressor working site altitude : m
Environment temperature ℃:
Has cooling water in the site or not ?
Voltage and frequency for three phase :
Do not has water vapor or H2s in the gas ?
Application for compressor？