What is the function of natural gas compressor?The main function of a natural gas compressor is to compress natural gas into high-pressure gas for convenient storage and transportation.The working principle of a natural gas compressor is to compress natural gas to a pressure higher than the outlet p
Characteristics of natural gas compressors in CNG refueling stationsThe main equipment of CNG refueling station consists of compressor unit, metering device, gas purification dryer, gas storage device, inflation sequence control panel, refueling column, gas vending machine, etc. According to their d
The application of helium compressors1. Mainly used in semiconductors, serving as a protective gas for evaporation, sputtering, and ion implantation vacuum systems in the front-end process equipment. The chemical reactions that occur during semiconductor processing are usually based on gases or liqu
Why choose explosion-proof?Many production sites produce flammable substances, with about two-thirds of underground coal mines containing explosive substances. In the chemical industry, more than 80% of production workshop areas contain explosive substances. The oxygen required for an explosion is u
Why do we use nitrogen and argon gas during laser cutting?What is laser cutting?Laser cutting is a widely used heat treatment process in industrial manufacturing. Laser cutting machines can quickly carve and cut metal plates, achieving high-quality surface smoothness even when processing particularl
The inspection and maintenance methods for cracks include:1. Permeation kerosene method: The inspection process involves first wiping the machine body and cylinder head with a cotton yarn soaked in kerosene, and then using dry cotton yarn to wipe areas where cracks may appear with kerosene. Immediat
1. Keep the lubricating oil in the oil pool within the height range specified by the oil dipstick. The characteristics of the lubricating oil in the oil pool at the bottom of the aircraft body should meet the requirements;2. Check if the oil level in the injector is below the marking value. Turn the
Laser cutting is a commonly used material processing technique, in which nitrogen is used as an auxiliary gas in some cases. The following are several reasons why laser cutting requires nitrogen gas:
Why are oxygen compressors the best option?Oxygen compressors are always important allies, either in their PSA or membrane presentation, they bring with them various solutions to many existing drawbacks in the health industry.Having an oxygen compressor nearby can mean the difference between a good