All standard industrial reciprocating oxygen compressor supplier are CE marked to meet the requirements of the EU market. We can also provide customized oxygen compressors according to customer conditions.
Our reciprocating industrial oxygen compressor have the following features
According to the different working conditions of the customer:
1. Completely 100% oil free, no oil required (depending on the specific model)
2. Cylinder Cast stainless steel
2. Oxygen for VPSA PSA and LOX gas source
3.NO pollution, keep the same purity into the gas
4. High reliability and high quality, comparable to the American RIX brand.
5. Low maintenance cost and simple operation.
6. 4000 hours piston ring working life under low pressure conditions, 1500-200O hours working life under high pressure conditions
7.TOP brand motor, can be specially pointed out, just like the SIMENSE brand
8. Supply customers in the Japanese market, in line with Japan's demanding quality requirements
9.CE approved to meet the requirements of the EU market
10. According to the customer's specific working conditions, the compressor is designed for single machine compression, two-stage compression, three-stage compression and four-stage compression.
11. Low speed, long life, average speed 260-350RPM,
12. Low noise, average noise below 75dB, can work quietly in the medical field
13, continuous continuous heavy-duty operation, can run stably for 24 hours without stopping
14. Each stage has an interstage safety valve. If the stage is overpressured, the safety valve will take off and release the overpressure gas to ensure the stable operation of the compressor.
15. Each level has a temperature controller. If the temperature between the stages exceeds the standard, the temperature display will sound and light alarm.
S/N | ITEMS | TECHNICAL DATA | |
1 | Working medium | Oxygen | |
2 | model | GOW-40/4-150 | |
3 | Structure | oil free reciprocating | |
4 | Pressure stage | 4 | |
5 | Rated capacity(standard)Nm3/h | 40Nm3 (@inlet pressure 4bar) | |
6 | Rated inlet pressure MPa(G) | 0.3-0.4 | |
7 | Rated outlet pressure MPa(G) | 15.0 ( 12.0 ,same machine ) | |
8 | Inlet temperature℃ | ≤45 | |
9 | Outlet temperature ℃ | ≤130 | |
10 | Transmit gas temperature℃ | ≤55 | |
11 | Shaft speed r/min | 280 ※ | |
12 | Cooling way | Water cooling | |
13 | Lubricate way | Shaft and connect rod | Grease seal |
Cylinder | Oil free lubricate | ||
14 | Motor power Kw | 15 KW ※ | |
15 | Transmit way | Belt driven | |
16 | Installation way | Simple basement | |
17 | Automatic control parts | Overload ,stop automatic | |
18 | External diamension L×W×H mm | 1500X950X1500 ※ | |
19 | Inlet and outlet mm | 25、15 | |
20 | Weight Kg | 680 ※ | |
21 | Voltage | 380v/50hz/3phase | |