Publish Time: 2022-08-19 Origin: Site
The oxygen compressor uses compressed air as energy to put oxygen under pressure, and is durable, practical, safe and explosion-proof. The device is a stand-alone pressure holding unit that is connected in series to the pressure line. It has fast pressure application speed, long service life, stable pressure, large flow rate, easy operation, convenient maintenance and safe use.
What are the advantages of oxygen compressor?
How does the oxygen compressor work?
How to use the oxygen compressor safely?
1. Regardless of what causes the pressure drop in the pressure holding circuit, the oxygen compressor automatically starts to supplement the leakage pressure and keep the pressure in the circuit constant.
2. The oxygen compressor is powered by gas without arc and sparks, and is fully used in places with flammable and explosive liquids or gases.
3. The oxygen compressor can do the same work, but its parts and seals are less and maintenance is easy
4. The oxygen compressor pressure boost pump is a piston pump. When working, the booster pump moves quickly back and forth. When the output pressure increases, the back and forth movement of the pump slows down until it stops. At this time, the pressure of the pump is constant and the energy consumption is lowest. The parts don't move anymore.
Oxygen compressor is a kind of machine for producing oxygen. First, it compresses the high density air, and then uses the difference of the condensation points of each component in the air to separate the gas and liquid at a certain temperature, and then further equalizes them. The oxygen compressor adopts the adsorption power of molecular sieves and is driven by a large displacement oil-free compressor according to the principle of physics to separate nitrogen and oxygen in the air and finally obtain highly concentrated oxygen.
1. All parts that come into contact with oxygen should be degreased strictly and thoroughly during new installation, replacement and overhaul. At the same time, care must be taken to degrease maintenance tools and operating gloves to ensure that these parts are grease-free.
2. All parts of Oxygen compressor cleaned with kerosene and in contact with oxygen must be disassembled and cleaned with a degreasing agent and must not be treated only for surface treatment.
3. Strictly observe the oxygen manometer: "no oil" and "no oil" are stored separately, and it is strictly forbidden to mix them. All pressure gauges that come into contact with oxygen use only pressure gauges without oil and carry out inspections and records.
4. An additional oil baffle is installed on the piston rod, and the opening of the original oil baffle is 90° to each other to realize a two-stage oil baffle, which prevents the grease on the piston rod from rising to the cylinder.
Anqing Bailian Oil Free Compressor Co., LTD. is an established manufacturer of oxygen compressors for more than several years. We work with customers from design to completion to ensure all technical requirements are met.