How to improve the operating efficiency of CO2 compressors?

Compressors have a history of development spanning hundreds of years. The common types of gas compressors are oxygen compressors, hydrogen compressors and carbon dioxide compressors, with different types of compressors corresponding to different sectors of application.

The product that we would like to introduce today is the CO2 compressor. It is a relatively important task to make the most of the physical properties of a CO2 compressor. In this article, we will focus on how to improve the operational efficiency of CO2 compressors.

The reasons to improve the operating efficiency of CO2 compressors

How to maintain CO2 compressors?

The characteristics of CO2 compressors

The reasons to improve the operating efficiency of CO2 compressors

There are two main purposes for improving the operational efficiency of CO2 compressors, one is to ensure the safety of the operator. Although CO2 compressors have a high degree of safety. However, if not operated properly, the equipment triggers a malfunction that may endanger the safety of the user. Secondly, it is to improve the service life of the equipment. High operating efficiency is a prerequisite for product quality.

How to maintain CO2 compressors?

Reducing high temperatures on equipment

CO2 compressors can suffer from high temperatures if they are not operated properly. This is due to the lack of grease in the equipment over a long period of operation, which leads to increased power in some components and thus wear and tear. The most straightforward way to solve a high-temperature situation on the equipment is to replace the moving parts. We have installed bearing temperature intake temperature monitoring devices on our compressors to avoid the high-temperature problem to a certain extent. However, the user still needs to consider the situation when using it.

Resolving vibrations

During normal operation of a CO2 compressor, if there is a sudden increase in vibration levels. In the event of an increase in amplitude, the pencil involvement should be stopped immediately and analyzed. If the unit vibrates excessively, the cause should be found and dealt with accordingly. The general cause of vibration in CO2 compressors is that it is caused by improper operation

The CO2 compressor is simple and easy to maintain. During normal use，more attention should be paid to the regular inspection of the components to prevent damage to the equipment, thus affecting the efficiency of the CO2 compressor.

The characteristics of CO2 compressors

·Small size

We have designed our CO2-hydrogen compressors to be lightweight and compact. As a result, it is very portable and its small footprint makes it less costly to operate.

·Low noise and vibration levels

When designing our products, we take into account the impact of noise and vibration on the user. Therefore, we have tested them intensively during the manufacturing process, resulting in CO2 compressors with low noise and vibration levels.

·Energy saving and environmental protection

Our CO2 compressors are designed to be energy efficient and environmentally friendly. The low energy consumption and lack of oil make it possible to run them without consuming excessive resources.

In summary, these are the main features of a CO2 compressor, a device that increases pressure by directly compressing the volume of the gas. CO2 compressors can be divided into three types according to their working principle: positive displacement, power, and thermal. Before purchasing a CO2 compressor, be certain to determine your route of use.