How to maintain High pressure Oxygen Compressors?

With the development of science and technology, an increasing number of innovative products have appeared in people's lives. These equipments have changed people's living quality to some degree.

The high pressure oxygen compressor is a type of oxygen compressor and we will focus today on its maintenance routine.

What are the operating methods of High pressure Oxygen Compressors?

What are the precautions when using a High pressure Oxygen Compressors?

How to avoid potential issues with Oxygen Compressors?

What are the operating methods of High pressure Oxygen Compressors?

The following are several methods of operation and adjustment.

The working principle of the high pressure oxygen compressor is not complicated. When the oxygen compressor is working normally, it is controlled by an automatic air pressure switch. When the pressure reaches its maximum value, the unit stops automatically. Conversely, the unit starts automatically when the pressure drops to 0.2-0.25mpa. It should be noted that the working pressure of the pneumatic switch of the high-pressure oxygen compressor is adjusted before leaving the factory and cannot be changed at will during use. If it is changed at random, safety problems may occur.

Alternatively, when manual control of the high-pressure oxygen compressor is required. We can stop the machine immediately by simply pressing the button on top of the pressure switch, which is one of the main advantages of the oxygen compressor.

In addition, the pressure control system can be adjusted within the range of 0.6-0.8mpa according to the user's requirements, but it is not allowed to exceed the rated working pressure, which is something to be noted. The specific operation is as follows: unscrew the screws on the pressure switch housing with a screwdriver, remove the housing and turn the hexagonal bolt with a spanner. When using, do not use a voltage higher than the rated voltage of +5% or -10%.

What are the precautions when using a High pressure Oxygen Compressor?

It's very important to use a High pressure Oxygen Compressors safely. The rated operating pressure of the oxygen compressor must not be exceeded. If air pressure is found in the storage tank, loosen the connection in time.

In terms of the way the oxygen compressor is connected. The oxygen compressor must not be set at a distance too far from the power supply to avoid reducing the voltage used by the motor. Besides, the choice of power cable must be in accordance with the regulations. The grounding end of the motor should be reliably earthed.

Furthermore, when selecting the ambient temperature of the high pressure oxygen compressor, it should be at a temperature of 40°C or below, as the higher the ambient temperature, the lower the air output of the compressor, which can lead to a situation where the oxygen compressor fails.

How to avoid potential issues with Oxygen Compressors?

The high pressure oxygen compressor's may, over a long period of time, suffer from varying levels of problems, a phenomenon we refer to as faulting. Below are a few common breakage scenarios for which we have listed solutions.

If the machine vibrates violently or makes abnormal noises, we should remove foreign objects or repair moving parts to prevent them from getting inside the machine.

If there is a lack of air pressure or reduced displacement, clean or replace the muffler, check and adjust the safety valve, gasket and valve plate, and check the condition of each component clearly. Alternatively, choose an oxygen compressor with a larger displacement, such as a high pressure oxygen compressor.