What are the characteristics of nitrogen compressors?

The nitrogen compressor has a working pressure range of 300 MPa for liquids and 90 MPa for gas. Depending on the shaft type, it is divided into multi-stage single-shaft types and four-stage double-shaft types.

• What is the difference between a nitrogen compressor and an air compressor?

• What are the characteristics of nitrogen compressors?

• What are the product features of nitrogen compressors?

What is the difference between a nitrogen compressor and an air compressor?

A nitrogen compressor is a device for compressing and transporting dry nitrogen. In addition to the main machine, the system also includes gas coolers on all levels, inlet and outlet buffers, asynchronous motors and oil supply equipment. The dry nitrogen enters the compressor via the filter and reaches the specified high pressure through multi-stage compression. After each compression stage, the hot flow gas is cooled by a water-cooled tube bundle heat exchanger.

The air compressor is the basic product of industrial modernization. It is often said that electrics and automation have the meaning of complete pneumatics; and the air compressor is supposed to provide air source power, and is the main body of electromechanical air source device, the core equipment of pneumatic system. It is a device that converts the mechanical energy of the drive machine (usually an electric motor) into gas pressure energy and is a pressure generating device for compressed air. Its composition includes oil circuit system, gas circuit system, water circuit system, power distribution system, screen protection system, DC power supply system and DTC control system.

What are the characteristics of nitrogen compressors?

1. The working pressure range of the nitrogen compressor is large. Different pump types can be selected to obtain different pressure ranges. The inlet air pressure and outlet air pressure can be adjusted accordingly. Can reach extremely high pressure, liquid 300 MPa, gas 90 MPa

2. The flow range of the nitrogen compressor is wide. For all types of pumps, only 1 kg air pressure can work smoothly. At this point, the minimum flow rate can be reached. After adjusting the intake air volume, different volume flows can be achieved.

3. Easy to control, from simple manual control to fully automatic control can meet the requirements.

4. Automatic restart: Regardless of what causes the pressure drop of the pressure holding circuit, it will automatically restart to supplement the leakage pressure and keep the circuit pressure constant.

5. Safe operation, gas powered, no arc and spark, can be used in dangerous places.

6. Maximum energy saving can reach 70% as maintaining pressure does not consume energy.

What are the product features of nitrogen compressors?

The product characteristics are as follows:

1. Oil-free lubrication is clean, energy-saving and low-noise

2. High efficiency.

3. Stable performance, can run continuously for 24 hours.

4. The unit of measurement adopts air-cooled or water-cooled type,

5.Closed structure, no leakage, stable operation,

6. Protection form: The whole machine is equipped with overcurrent protection, overpressure protection, overpressure protection, safety valve protection at the inlet and outlet ends, as well as pressure indicator and other complete protection systems, and the equipment runs normally.

7. Installation: The oil-free nitrogen compressor is a pre-installed product without basic installation and can be used with the power on, and the operation is easy.

If you are interested in this product and would like to obtain more information and related information, please contact Anqing Bailian Oil Free Compressor Co., LTD.