What is the working principle of an oxygen compressor?

A compressor is a machine that compresses gas to increase air pressure or deliver gas. The manufacturer conveniently uses compressed gas. According to the compressed gas, it is calledOxygen compressor, ACO2 compressor, ANitrogen compressorand many more.

Focus:

• The working principle of oxygen compressor

• What is a piston oxygen compressor

• Placement of the oxygen compressor

The working principle of oxygen compressor

Our company’s high-pressure oxygen compressor series are all oil-free reciprocating pistons, depending on the displacement and pressure

It is divided into three stages, four stages and five stages. The cooling method is air cooling and water cooling. There is no lubricating oil in the machine. The rotating parts are sealed by grease lubrication. The inner cylinder movement seal is made of self-lubricating material to ensure that the compressed gas never touches any oil, and is mainly used for oxygenation.

The working principle of the reciprocating piston compressor is to use a driving machine to drive the crankshaft to rotate. The crankshaft drives the piston to reciprocate through the connecting rod. The reciprocating movement of the piston causes the cylinder volume to change periodically: the intake valve and exhaust valve at the top of the cylinder are periodically opened and closed. The air sucked in by the intake valve is compressed by the piston to reach exhaust pressure, and passes through the exhaust valve. The exhaust pipe and check valve enter the gas storage tank for users to use.

What is a piston oxygen compressor

A piston compressor is a compressor that relies on the reciprocating motion of a piston to pressurize and deliver gas. It is a positive displacement compressor, also known as \"reciprocating piston compressor\" or \"reciprocating compressor\". It is mainly composed of studio, transmission parts, fuselage and auxiliary parts. The working chamber is directly used for compressed gas, and consists of a cylinder, a cylinder liner, a valve, a packing, a piston and a piston rod. The piston is driven by the piston rod to reciprocate in the cylinder. The volumes of the working chambers on both sides of the piston alternate in turn. As the pressure through the gas valve increases, the volume side gas decreases, and due to the decrease in air pressure, the volume side gas increases. The valve sucks in gas, and the transmission parts are used to achieve reciprocating motion. There are crankshaft connecting rods, eccentric sliders, swashplates, etc. The most commonly used is the crankshaft connecting rod mechanism, which consists of a crosshead, a connecting rod and a crankshaft.

Placement of the oxygen compressor

1. The oxygen compressor should be placed in an area with good ventilation, low humidity, little dust, no dust, sufficient light and easy to check.

2. The casters of the oxygen compressor must be placed on the same horizontal surface, otherwise it will cause vibration and even cause safety accidents.

3. The most important thing is that the oxygen compressor must be kept away from flammable and explosive materials.

4. For operation and maintenance, there should be a 0.5-0.8 meter passage around the machine.

The use of oxygen compressors is relatively widespread, and the scale of use of oxygen compressors is gradually expanding. Due to the drop in ambient air levels, more and more oxygen is used for oxygen therapy.