- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
| cooling way: | |
|---|---|
| ETD Time: | |
| Quantity: | |
TZWH-240/10-23
TECHNICAL DATA | ||||
Medium | H2 | Quantity | 1 | |
Inlet pressure MPa（G） | 1.0 | Inlet temperature ℃ | 0~40 | |
Discharge pressure Mpa（G） | 2.3 | Discharge temperature（after cooling） ℃ | ≤55 | |
Flow rate Nm3/h | 240(While inlet pressure=1.0MPa) | Piston stroke mm | 75 | |
Model | TZWH-240/10-23 | Compression stages | 1 | |
Structural style | Vertical oil-free pry mounted type | Cylinder quantity | 2 | |
Shaft speed r/min | 440 ※ | Voltage V | 380 | |
Cooling mode | Air cooling | Cooling water flow t/h | ---- | |
Shaft power kw | ≤12 | Main motor speed r/min | 1460 | |
Motor | 15kw 380V50Hz dIICT4 explosion-proof ※ | |||
Dimensions mmXmmXmm | 2200*1650*1800※ | weight T | 1.8 | |
Import and export dimensions | Inlet DN32 Discharge DN25 | Water inlet and outlet interface | ---- | |
Drive mode | Coupling+reducer | |||
Main material | frame, crankshaft | cast iron | ||
Gas valves and pipelines | Stainless steel | |||
Pistons and guide rings | Filled with PTFE | |||
Scope of supply | Main engine, explosion-proof motor, cooler, pry mounted chassis, explosion-proof starting cabinet, intake filter, explosion-proof oil pump motor set, safety valve, check valve, outlet matching flange, random documents, etc. | |||
Additional notes | 1. Lubricating oil should be provided by the user upon startup. (When the ambient temperature is below 5 ℃, use low-temperature lubricating oil instead) 2. Nitrogen filled sealing of piston rod; Continuous provision of nitrogen gas source is required; Nitrogen consumption:~3Nm ³/ H 3. On site electrical protection level: dIIBT4 4. The column data ※is for user reference, and there may be discrepancies when the machine leaves the factory. | |||
Delivery time | 70 days after the contract is signed and the advance payment is received | |||
TECHNICAL DATA | ||||
Medium | H2 | Quantity | 1 | |
Inlet pressure MPa（G） | 1.0 | Inlet temperature ℃ | 0~40 | |
Discharge pressure Mpa（G） | 2.3 | Discharge temperature（after cooling） ℃ | ≤55 | |
Flow rate Nm3/h | 240(While inlet pressure=1.0MPa) | Piston stroke mm | 75 | |
Model | TZWH-240/10-23 | Compression stages | 1 | |
Structural style | Vertical oil-free pry mounted type | Cylinder quantity | 2 | |
Shaft speed r/min | 440 ※ | Voltage V | 380 | |
Cooling mode | Air cooling | Cooling water flow t/h | ---- | |
Shaft power kw | ≤12 | Main motor speed r/min | 1460 | |
Motor | 15kw 380V50Hz dIICT4 explosion-proof ※ | |||
Dimensions mmXmmXmm | 2200*1650*1800※ | weight T | 1.8 | |
Import and export dimensions | Inlet DN32 Discharge DN25 | Water inlet and outlet interface | ---- | |
Drive mode | Coupling+reducer | |||
Main material | frame, crankshaft | cast iron | ||
Gas valves and pipelines | Stainless steel | |||
Pistons and guide rings | Filled with PTFE | |||
Scope of supply | Main engine, explosion-proof motor, cooler, pry mounted chassis, explosion-proof starting cabinet, intake filter, explosion-proof oil pump motor set, safety valve, check valve, outlet matching flange, random documents, etc. | |||
Additional notes | 1. Lubricating oil should be provided by the user upon startup. (When the ambient temperature is below 5 ℃, use low-temperature lubricating oil instead) 2. Nitrogen filled sealing of piston rod; Continuous provision of nitrogen gas source is required; Nitrogen consumption:~3Nm ³/ H 3. On site electrical protection level: dIIBT4 4. The column data ※is for user reference, and there may be discrepancies when the machine leaves the factory. | |||
Delivery time | 70 days after the contract is signed and the advance payment is received | |||
