12nm3 250bar Oil Free Argon Compressor
Compressing argon requires special purpose-built compressors.
Argon is a rare gas widely used in industry. It is very inert in nature, and it can neither burn nor support combustion. In aircraft manufacturing, shipbuilding, atomic energy industry and machinery industry, argon is often used as welding shielding gas for special metals, such as aluminum, magnesium, copper and their alloys and stainless steel, to prevent the welding parts from being oxidized or nitrided by air. [4]
① Aluminum industry. Used instead of air or nitrogen to generate an inert atmosphere in the manufacturing process of aluminum; Help remove unnecessary soluble gas during degassing; And removing dissolved hydrogen and other particles from the molten aluminum. [5]
② Steel making. For replacing gas or vapor and preventing oxidation in the process flow; For stirring molten steel to maintain a constant temperature and the same composition; Help remove unnecessary soluble gas during degassing; As the carrier gas, argon can be used to determine the composition of the sample by chromatography; Argon can also be used in the argon oxygen decarbonization process (AOD) used in stainless steel refining to remove carbon monoxide and reduce the loss of chromium. [5]
③ Metalworking. Argon is used as inert shielding gas in welding; Provide oxygen and nitrogen free protection in annealing and rolling of metals and alloys; And for flushing the molten metal to eliminate pores in the casting. [5]
④ Welding shielding gas. As a shielding gas in the welding process, argon can avoid the burning loss of alloy elements and other welding defects caused thereby, so that the metallurgical reaction in the welding process becomes simple and easy to control, so as to ensure the high quality of welding. [3] Based on the laser remelting test of HT250 gray cast iron, the formation mechanism of pores in remelting zone of samples under different atmosphere protection conditions was studied. The results show that the pores in the remelting zone are precipitated pores under argon protection; Under the open condition, the pores in the remelting zone are precipitated pores and reactive pores.
⑤ Other uses. Electronics, lighting, argon knife, etc.
Argon Compressor application
1. Arc welding (cutting) stainless steel, magnesium, aluminum, and other alloy Argon gas Protection gas Booster,
2. In the process of brewing, replace the oxygen in the beer bucket,
3. All kinds of stainless steel high temperature alloy heat treatment heating protection gas,
The main features of bailian feng brand oil free argon recovery compressor
All oil-free lubrication is clean and non-polluting.
High efficiency and low energy consumption.
Fully dynamic balanced design, low vibration
High reliability, continuous operation for 24 hours.
No special basic requirements, easy to install and maintain
The unit is air-cooled or water-cooled to reduce installation costs.
Compact structure, low operating and maintenance costs.
here is quite recovery argon compressor technical data
OIL FREE ARGON RECIPROCATING COMPRESSOR
S/N | ITEMS | TECHNICAL DATA | |
1 | Working medium | Dry Argon gas | |
2 | model | GArZ-12/0.5-250 | |
3 | Structure | oil free reciprocating,Vertical type skid mount | |
4 | Pressure stage | 4 stage ,4 cylinder | |
5 | Rated capacity(standard)Nm3/h | 12 | |
6 | Rated inlet pressure MPa(G) | 0-0.1 | |
7 | Rated outlet pressure MPa(G) | 25.0 | |
8 | Inlet temperature℃ | ≤35 | |
9 | Outlet temperature ℃ | ≤150 | |
10 | Transmit gas temperature℃ | ≤55 after cooling | |
11 | Shaft speed r/min | 200 ※ | |
12 | Cooling way | water cooling | |
13 | Lubricate way | Shaft and connect rod | grease |
Cylinder | Oil free lubricate | ||
Shaft power | ≤5.4 | ||
14 | Motor power Kw | 7.5KW 415V 50HZ 3phase ※ | |
15 | Transmit way | Belt driven | |
16 | Installation way | Simple basement | |
17 | Automatic control parts | Overload ,stop automatic | |
18 | External dimension L×W×H mm | 1650X950X1400 ※ | |
19 | Inlet and outlet mm | 25、M16*1.5 | |
20 | Weight Kg | 820 ※ | |
21 | Voltage | 415V 50HZ 3phase | |
22 | Water consumption | 800kgs/hr | |
Water inlet and outlet | DN20 | ||
Crank Body | Iron steel | ||
Piston ring and packing stuff | Filled with polytetrafluoroethylene | ||
Gas valve ,pipe ,and cylinder | Stainless steel | ||
23 | Seal way |
12nm3 250bar Oil Free Argon Compressor
Compressing argon requires special purpose-built compressors.
Argon is a rare gas widely used in industry. It is very inert in nature, and it can neither burn nor support combustion. In aircraft manufacturing, shipbuilding, atomic energy industry and machinery industry, argon is often used as welding shielding gas for special metals, such as aluminum, magnesium, copper and their alloys and stainless steel, to prevent the welding parts from being oxidized or nitrided by air. [4]
① Aluminum industry. Used instead of air or nitrogen to generate an inert atmosphere in the manufacturing process of aluminum; Help remove unnecessary soluble gas during degassing; And removing dissolved hydrogen and other particles from the molten aluminum. [5]
② Steel making. For replacing gas or vapor and preventing oxidation in the process flow; For stirring molten steel to maintain a constant temperature and the same composition; Help remove unnecessary soluble gas during degassing; As the carrier gas, argon can be used to determine the composition of the sample by chromatography; Argon can also be used in the argon oxygen decarbonization process (AOD) used in stainless steel refining to remove carbon monoxide and reduce the loss of chromium. [5]
③ Metalworking. Argon is used as inert shielding gas in welding; Provide oxygen and nitrogen free protection in annealing and rolling of metals and alloys; And for flushing the molten metal to eliminate pores in the casting. [5]
④ Welding shielding gas. As a shielding gas in the welding process, argon can avoid the burning loss of alloy elements and other welding defects caused thereby, so that the metallurgical reaction in the welding process becomes simple and easy to control, so as to ensure the high quality of welding. [3] Based on the laser remelting test of HT250 gray cast iron, the formation mechanism of pores in remelting zone of samples under different atmosphere protection conditions was studied. The results show that the pores in the remelting zone are precipitated pores under argon protection; Under the open condition, the pores in the remelting zone are precipitated pores and reactive pores.
⑤ Other uses. Electronics, lighting, argon knife, etc.
Argon Compressor application
1. Arc welding (cutting) stainless steel, magnesium, aluminum, and other alloy Argon gas Protection gas Booster,
2. In the process of brewing, replace the oxygen in the beer bucket,
3. All kinds of stainless steel high temperature alloy heat treatment heating protection gas,
The main features of bailian feng brand oil free argon recovery compressor
All oil-free lubrication is clean and non-polluting.
High efficiency and low energy consumption.
Fully dynamic balanced design, low vibration
High reliability, continuous operation for 24 hours.
No special basic requirements, easy to install and maintain
The unit is air-cooled or water-cooled to reduce installation costs.
Compact structure, low operating and maintenance costs.
here is quite recovery argon compressor technical data
OIL FREE ARGON RECIPROCATING COMPRESSOR
S/N | ITEMS | TECHNICAL DATA | |
1 | Working medium | Dry Argon gas | |
2 | model | GArZ-12/0.5-250 | |
3 | Structure | oil free reciprocating,Vertical type skid mount | |
4 | Pressure stage | 4 stage ,4 cylinder | |
5 | Rated capacity(standard)Nm3/h | 12 | |
6 | Rated inlet pressure MPa(G) | 0-0.1 | |
7 | Rated outlet pressure MPa(G) | 25.0 | |
8 | Inlet temperature℃ | ≤35 | |
9 | Outlet temperature ℃ | ≤150 | |
10 | Transmit gas temperature℃ | ≤55 after cooling | |
11 | Shaft speed r/min | 200 ※ | |
12 | Cooling way | water cooling | |
13 | Lubricate way | Shaft and connect rod | grease |
Cylinder | Oil free lubricate | ||
Shaft power | ≤5.4 | ||
14 | Motor power Kw | 7.5KW 415V 50HZ 3phase ※ | |
15 | Transmit way | Belt driven | |
16 | Installation way | Simple basement | |
17 | Automatic control parts | Overload ,stop automatic | |
18 | External dimension L×W×H mm | 1650X950X1400 ※ | |
19 | Inlet and outlet mm | 25、M16*1.5 | |
20 | Weight Kg | 820 ※ | |
21 | Voltage | 415V 50HZ 3phase | |
22 | Water consumption | 800kgs/hr | |
Water inlet and outlet | DN20 | ||
Crank Body | Iron steel | ||
Piston ring and packing stuff | Filled with polytetrafluoroethylene | ||
Gas valve ,pipe ,and cylinder | Stainless steel | ||
23 | Seal way |