20m3 Air Cooling Oil Free Medicacl High Pressure Oxygen Compressor Manufacturers

oil free high pressure oxygen compressor manufacturers

Oxygen compressor refers to a compressor used to pressurize oxygen and realize transportation or storage. There are two types of general medical oxygen compressors. One is that the hospital's PSA oxygen generator needs to be pressurized to supply various wards and operating rooms. It provides 7-10 kg of line pressure. One type of PSA oxygen needs to be stored in a high-pressure container for convenient use. The storage pressure is generally 100 barg, 150barg, 200barg, or a higher pressure of 300barg.

Industrial applications for medical filling cylinder oxygen compressor machine include low or medium pressure oxygen compressor systems for VSA applications in steel mills, paper mills and water treatment plants.

Fully bottle cylinder filling oxygen compressor, air-cooled and water-cooled two cooling modes, single-action and double-acting structure, vertical and angle type, wind type series high pressure oil-free lubrication Oxygen compressor, excellent performance, stable operation, high efficiency and energy saving, long service life, widely used in oxygen tanking, chemical process and plateau oxygen supply, together with oxygen generator to form a simple and safe high-pressure oxygen system.

This medical oxygen compressor high pressure for manufacturers is suitable for inlet pressure 3-4barg (40-60psig) and discharge pressure 150barg (2150psig)

The flow rate of 20NM3/hour of small PSA air separation oxygen system provides clean oxygen filling service for oxygen cutting in community and small island hospitals. It can run continuously for 24 hours, and can reach more than 20 bottles per time.

This medical oil free high pressure oxygen compressor features

It adopts four-stage compression, water-cooled cooling method and stainless steel water cooler to ensure the good cooling effect of the compressor, which can effectively extend the service life of key wearing parts. The inlet is equipped with low intake pressure and the exhaust end is equipped with exhaust. High pressure protection, high exhaust temperature protection, safety valve and temperature display for each stage. If over temperature and overpressure, the system will alarm and stop, ensuring safe operation. There is a forklift at the bottom of the compressor, which can be easily transferred. Construction site.

All standard oil free high pressure oxygen medical compressor are CE marked to meet the requirements of the EU market. We can also provide customized oxygen compressors according to customer conditions.

Our oxygen compressors have the following features

According to the different working conditions of the customer:

Core Characteristics‌
‌Oil-Free Lubrication Design‌

• Uses rust-resistant materials such as stainless steel and brass to prevent oil contamination and ensure oxygen purity.

• Employs self-lubricating materials (e.g., polytetrafluoroethylene) for piston rings and seals, reducing friction and maintenance needs.

‌High-Pressure Output Capability‌

• Supports high-pressure filling at 150-200 kg (approximately 15-20 MPa), meeting demands for high-altitude oxygen filling and chemical bottle charging.

• Typical pressure range: 0.1-100 MPa (e.g., Guoxia brand).

‌Safety and Reliability‌

• Equipped with a fully oil-free self-lubricating system to reduce explosion risks.

1. The above parameters are for reference only, and is subject to our  technical quotation

2. More displacement, higher filling pressure, such 20Mpa,23Mpa,30Mpa,please feel free  consult us

3.Kinly note ,if you have compressor inquiry please tell us follows information when you send inquiry:

*Compressor working medium:

 If single gas ,how many purity ? if mixed gas , what’s gas content lit ?   

*Suction pressure(gauge pressure):     barg

*Exhaust pressure(gauge pressure):     barg

*Flow rate per hour for compressor: (Nm3/hr):

Compressor gas suction temperature ?

Compressor working hours per day :    hours 

Compressor working site altitude :   m 

Environment temperature ℃: 

Has cooling water in the site or not ?

Voltage and frequency for three phase :  

Do not has water vapor or H2s in the gas ?

Application for compressor？